Details
Laser: Eleksmaker 2.5w
Software: LightBurn
Wood: Plywood 1/2 in
Project dimensions: 12×18 board, engraved 350×237 mm
Time: 1h56
| Speed | Power | DPI | Notes | |
| Image | 1900 mm/m | 70% | 102 | |
| Vector | 1900 mm/m | 70% | 102 |
Result
Very good. The original background was not giving good contrast (light grey over light blue), and was removed by increasing the brightness in the picture. Should have added an artificial ground to make it less float. Playing with gamma (decreasing it in this case) helped a lot to reveal the details on the rider.