Details
Laser: Eleksmaker 2.5w
Software: LightBurn
Wood: Plywood 1/2 in
Project dimensions: 4×4 in
Time: 3x 16 minutes (48 minutes)
Result
| Speed | Power | DPI | Notes | |
| Vector | 600 mm/m | 70% | 84 (0.3) | Fill speed: 600 Border speed: 800 |
Good results with high contrast
Note: The image was from a google search for personal use only.
Lessons Learned
Slow Speed. By using cheap plywood (sanded smooth), there is a lot of veines which burn unevenly. Using a slow speed and high power was the only way to burn over those and give a uniform design. This would NOT work for dithered image / photo.